Bộ chuyển đông tuyến tính

  (317 )
  • Mã sản phẩm:1
  • Nhãn hiệu:THK & HISAKA
  • Xuất xứ:Singaport
  • Giá :Liên hệ nhà cung cấp
  • Địa chỉ :
  • Giang hàng :

Splines

 

Shaft for DP/DPM 

  • Shaft for DP/DPM

  • DP Nut: Cylindrical Nut

  • DPM Nut: Flanged Nut

Ball Splines:

LBF Set

Flanged Nut

The spline nut can be attached to the housing via the flange, making assembly simple. It is optimal for locations where the housing may be deformed if a keyway is machined on its surface, and where the housing width is small.

LBF Set

Flanged Nut

The spline nut can be attached to the housing via the flange, making assembly simple. It is optimal for locations where the housing may be deformed if a keyway is machined on its surface, and where the housing width is small.

LF Set

Flanged Nut

The spline nut can be attached to the housing via the flange, making assembly simple. It is optimal for locations where the housing may be deformed if a keyway is machined on its surface, and where the housing width is small.

LT Set

Cylindrical Nut

The most compact type with a straight cylindrical spline nut. When transmitting a torque, a key is driven into the body.

LTR Set

Rotary Nut

A compact unit type whose support bearings are directly integrated with the outer surface of the spline nut.

Ball Screw

BF

Supported Side-Square Type
(Inner Diameter: 8 - 40 mm)

The Support Unit is compactly designed to accommodate the space in the installation site. As the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining.

BIF Set

Unfinished Shaft Ends

The right and left screws are provided with a phase in the middle of the ball screw nut, and an axial clearance is set at a below-zero value (under a preload). This compact model is capable of a smooth motion.

BK

Fixed Side-Square Type
(Inner Diameter: 10 - 40 mm)

The Support Unit is compactly designed to accommodate the space in the installation site. As the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining.

Shaft for BLK/BLR

Standard Lead Rolled Ball Screw Shaft

BLK Nut

Using an end-cap method, this model achieve stable motion in a high-speed rotation.

BLR Nut

Rotary Nut Type

The Rotary Ball Screw is a rotary-nut ball screw unit that has an integrated structure consisting of a ball screw nut and a support bearing. The support bearing is an angular bearing that has a contact angle of 60 degree, contains an increased number of balls and achieves a large axial rigidity.

BNF Set

Unfinished Shaft Ends

The simplest type with a single ball screw nut. It is designed to be mounted using the bolt holes drilled on the flange.

BNK Set

Finished Shaft Ends

To meet the space-saving requirement, this type of Ball Screw has a standardized screw shaft and a ball screw nut. The ends of the screw shaft are standardized to fit the corresponding support unit.

BNT Nut

Pillow Block Type

Since the mounting screw holes are machined on the square ball screw nut, this model can compactly be mounted on the machine without a housing.

Shaft for BTK-V/BNT

Large Lead Rolled Ball Screw Shaft

EF

Supported Side-Square Type
(Inner Diameter: 6 - 20 mm)

The Support Unit is compactly designed to accommodate the space in the installation site. As the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining.

BTK-V Nut

This Rolled Ball Screw feed achieves a DN value of 100,000 by using a new circulation structure. Since the nut outer diameter and the mounting holes of this model are dimensionally interchangeable with the previous model BTK, model BTK can be replaced with this model.

EK

Fixed Side-Square Type
(Inner Diameter: 4 - 20 mm)

The Support Unit is compactly designed to accommodate the space in the installation site. As the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining.

FF

Supported Side-Round Type
(Inner Diameter: 6 - 30 mm)

The Support Unit is compactly designed to accommodate the space in the installation site. As the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining.

FK

Fixed Side-Round Type
(Inner Diameter: 4 - 30 mm)

The Support Unit is compactly designed to accommodate the space in the installation site. As the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining.

 

 

MBF Set

Unfinished Shaft Ends
Flange with Counterbore Holes

A miniature type with a screw shaft diameter of 4 to 14 mm and a lead of 1 to 5mm

MC

Nut Bracket for BNK

The Nut Bracket is standardized for the standard Ball Screw assembly provided with finished shaft ends. It is designed to be secured directly on the table with bolts. Since the height is low, it can be mounted on the table only using bolts.

Xem thêm sản phẩm Phụ tùng máy được bán bởi doanh nghiệp:
Nhóm sản phẩm cùng danh mục
DMCA.com Protection Status